Submissions from 1998
Product design for disassembly and bulk recycling, M. Sodhi and W. A. Knight
Interphase strength of Tl-MMC using a localized stress approach, M. Tamin and H. Ghonem
Submissions from 1997
Combined natural convection and radiation heat transfer in a vertical air cavity with hexagonal honeycomb core of negligible thickness, Y. Asako, Y. Yamaguchi, Lishun Chen, and M. Faghri
A novel procedure for selection of materials in concept design, P. Dewhurst and C. C. Reynolds
Generalized preisach model for hysteresis nonlinearity of piezoceramic actuators, Ping Ge and Musa Jouaneh
Opportunities in abrasive water-jet machining, A. M. Hoogstrate, C. A. Van Luttervelt, P. Gosger, A. W. Momber, H. K. Tönshoff, H. Louis, F. Klocke, D. Riviere, Ales C. Magnusson, J. Gardner, K. P. Rajurkar, T. J. Kim, R. Konacevic, J. Ryd, A. Henning, C. Ojmertz, J. P. Kruth, J. Meijer, and M. C. Leu
Mean-flow characteristics of turbulent curved jets in a moderately confining space, Zhimin Hu and F. M. White
A flexible automated foam cutting system, M. Jouaneh, A. Hammad, and P. Datseris
Modeling and control of a micro-positioning tower, M. Jouaneh and Ge Ping
Effects of compressibility and rarefaction on gaseous flows in microchannels, H. P. Kauehpour, Mohammad Faghri, and Y. Asako
Effects of compressibility and rarefaction on gaseous flows in microchannels, H. P. Kavehpour, M. Faghri, and Y. Asako
Analysis of products for end-of-life management, W. A. Knight and G. Boothroyd
State of the art of research and development in abrasive waterjet machining, R. Kovacevic, M. Hashish, R. Mohan, M. Ramulu, T. J. Kim, and E. S. Geskin
Using tool life models to minimize processing time on a flexible machine, Bernard F. Lamond and Manbir S. Sodhi
Experimental study of effect of vibration on ice contact melting within rectangular enclosures, Liang Quan, Zongqin Zhang, and Mohammad Faghri
Evaluation of fracture mechanics parameters in bimaterial systems using strain gages, Vittorio Ricci, Arun Shukla, and Raman P. Singh
Effect of particle damage on wave propagation in granular materials, Martin H. Sadd and J. Y. Gao
Numerical Analysis of Wave Propagation Through Assemblies of Elliptical Particles, M. H. Sadd, J. Gao, and A. Shukla
Numerical solution of the effect of vibration on melting of unfixed rectangular phase-change material under low-gravity environment, A. Shirvanian, M. Faghri, Z. Zhang, and Y. Asako
A simple fiber-optic sensor for use over a large displacement range, F. Sienkiewicz and A. Shukla
Initiation, propagation and arrest of an interface crack subjected to controlled stress wave loading, Raman P. Singh, Mahesh Kavaturu, and Arun Shukla
Investigation of the mechanics of intersonic crack propagation along a bimaterial interface using coherent gradient sensing and photoelasticity, Raman P. Singh, John Lambros, Arun Shukla, and Ares J. Rosakis
A discrete element study of the relationship of fabric to wave propagational behaviours in granular materials, Qiming Tai and Martin H. Sadd
Interphase strength of Ti-MMC using a localized stress approach, M. Tamin and H. Ghonem
Processing-related interface properties in titanium metal matrix composites, M. N. Tamin, D. J. Osborne, and H. Ghonem
Static and dynamic response of elastomeric materials: An insight into the design of durable elastomeric components, Glenn E. Vallee and Arun Shukla
Natural convection and radiation heat transfer in a vertical porous layer with a hexagonal honeycomb core (1st Report, Numerical analysis), Yoshiyuki Yamaguchi, Yutaka Asako, and Mohammad Faghri
Numerical prediction of transitional characteristics of flow and heat transfer in a corrugated duct, L. C. Yang, Y. Asako, Y. Yamaguchi, and M. Faghri
Propagation of explosive pulses in assemblies of disks and spheres, Yan Zhu, Frank Sienkiewicz, Arun Shukla, and Martin Sadd
Submissions from 1996
Combined natural convection and radiation heat transfer in a vertical air cavity with hexagonal honeycomb core of negligible thickness, Y. Asako, Y. Yamaguchi, Lishun Chen, and M. Faghri
Numerical and experimental prediction of transitional characteristics of flow and heat transfer in an array of heated blocks, Y. Asako, Y. Yamaguchi, and M. Faghri
Optimum design of microchannel heat sinks, S. F. Choquette, M. Faghri, M. Charmchi, and Y. Asako
Compressible fluid flow in micron sized channels, S. F. Choquette, M. Faghri, E. J. Kenyon, and Bengt Sunden
Tracking control of a piezoceramic actuator, Ping Ge and Musa Jouaneh
Bridging fiber stress in metal matrix composites - An analytical model, H. Ghonem
Design for Disassembly and the Environment, T. Harjula, B. Rapoza, W. A. Knight, and G. Boothroyd
Real time control of thermal distortion during pulsed laser welding of optical packages, Musa Jouaneh and Sabbir Rangwala
High-speed orientation and stacking of parts based on internal features, Anil Mankame, Philip Datseris, and Musa Jouaneh
Microstructural characterization of SiC/Al and FP/Al metal matrix composites subjected to dynamic loadings, M. Nanduri and A. Shukla
Displacement measurements over a wide range utilizing a simple intensity-based fiber optic sensor, Frank Sienkiewicz and Arun Shukla
A combined experimental and numerical scheme for the determination of contact loads between cemented particles, F. Sienkiewicz, A. Shukla, M. Sadd, Z. Zhang, and J. Dvorkin
A Critical Evaluation of the Performance of Optical Fiber Sensors for Monitoring Dynamic Strains, Raman P. Singh and Arun Shukla
Explosively generated pulse propagation through particles containing natural cracks, Raman Singh, Arun Shukla, and Harry Zervas
Subsonic and intersonic crack growth along a bimaterial interface, R. P. Singh and A. Shukla
Surface roughness monitoring using computer vision, Manbir S. Sodhi and Khalil Tiliouine
Evolution of bridging fiber stress in titanium metal matrix composites at elevated temperature, M. N. Tamin and H. Ghonem
Fiber damage mechanisms in titanium metal matrix composites, M. N. Tamin and H. Ghonem
Interphase shear strength of titanium metal matrix composites at elevated temperatures, M. N. Tamin, D. J. Osborne, and H. Ghonem
Interphase shear strength of titanium metal matrix composites at elevated temperatures, M. N. Tamin, D. J. Osborne, and H. Ghonem
A study of the dynamic behavior of elastomeric materials using finite elements, G. E. Vallee and Arun Shukla
A Manufacturing system for automated production of polystyrene molds, A. Viswanathan, M. Jouaneh, P. Datseris, and W. Palm
Investigation of stresses in the orthogonal cutting of fiber-reinforced plastics, C. W. Wern, M. Ramulu, and A. Shukla
Contributed papers in fluids engineering, Frank M. White and John Baker
Design and characterization of a low-profile micropositioning stage, Renyi Yang, Musa Jouaneh, and Rudolph Schweizer
An erosion model for abrasive waterjet milling of polycrystalline ceramics, Jiyue Zeng and Thomas J. Kim
An erosion model of polycrystalline ceramics in abrasive waterjet cutting, Jiyue Zeng and Thomas J. Kim
A new low-reynolds-number k-ϵ model for turbulent flow over smooth and rough surfaces, Hanzhong Zhang, Mohammad Faghri, and Frank M. White
High temperature/high frequency fatigue crack growth in titanium metal matrix composites, Dian Zheng and Hamouda Ghonem
The effect of microstructural fabric on dynamic load transfer in two dimensional assemblies of elliptical particles, Yan Zhu, Arun Shukla, and Martin H. Sadd
Submissions from 1995
Dilute estimates of inelastic deformation in metal-matrix composites, M. D. Adley and D. G. Taggart
Prediction of turbulent heat transfer in the entrance of an array of heated blocks using low-reynolds-number k-e model, Y. Asako and Mohammad Faghri
Unsteady three-dimensional natural convection in an inclined air slot with a hexagonal honeycomb core, Y. Asako, Y. Yamaguchi, T. Yamanaka, and M. Faghri
Entrance Analysis of Turbulent Flow in an Array of Heated Rectangular Blocks, Mohammed Faghri and Majid Molki
Modeling hysteresis in piezoceramic actuators, Ping Ge and Musa Jouaneh
On the use of strain gages in dynamic fracture mechanics, S. K. Khanna and A. Shukla
Separating the effects of Ti3Al and silicide precipitates on the tensile and crack growth behavior at room temperature and 593 °C in a near-alpha titanium alloy, A. Madsen and H. Ghonem
Orientation and stacking of parts based on internal features, Anil Mankame, Musa Jouaneh, and Philip Datseris
A correlation for heat transfer and wake effect in the entrance region of an in-line array of rectangular blocks simulating electronic components, M. Molki, M. Faghri, and O. Ozbay
Fiber-optic acoustic sensor for nondestructive evaluation, Nadarajah Narendran, Chonghua Zhou, Stephen Letcher, and Arun Shukla
Aging effects on the creep behavior of the near-alpha titanium alloy Ti-1100, A. H. Rosenberger, A. Madsen, and H. Ghonem
Effect of flaws on the stress wave propagation in particulate aggregates: Near and far field observations, Raman Singh, Arun Shukla, and Harry Zervas
Influence of interfacial properties on fiber debonding in titanium metal matrix composites, M. N. Tamin, D. J. Osborne, and H. Ghonem
TIME‐DEPENDENT FATIGUE CRACK GROWTH IN TITANIUM METAL MATRIX COMPOSITES, T. Zhang and H. Ghonem
Fatigue crack growth of SM-1240/TIMETAL-21S metal matrix composites at elevated temperatures, D. Zheng and H. Ghonem
Fiber-optic microphone based on a combination of Fabry-Perot interferometry and intensity modulation, Chonghua Zhou, Stephen V. Letcher, and Arun Shukla
Submissions from 1994
Numerical solution for melting of unfixed rectangular phase-change material under low-gravity environment, Y. Asako, M. Faghri, M. Charmchi, and P. A. Bahrami
Parametric study of turbulent three-dimensional heat transfer of arrays of heated blocks encountered in electronic equipment, Y. Asako and Mohammad Faghri
Prediction of turbulent heat transfer in the entrance of an array of heated blocks using Low-Reynolds number κε model, Y. Asako and Mohammad Faghri
Entrance analysis of turbulent flow in an array of heated rectangular blocks, M. Faghri, M. Molki, J. Chrupcala, and Y. Asako
Prediction of turbulent three-dimensional heat transfer of heated blocks using low-reynolds number two-equation model, Mohammad Faghri and Y. Asako
An interactive simulation technique to determine the internal stress states in fiber reinforced metal matrix composites, H. Ghonem, Y. Wen, and D. Zheng
Development of stress field equations and determination of stress intensity factor during dynamic fracture of orthotropic composite materials, Sanjeev K.K. Hanna and Arun Shukla
Study of the curved jet oscillation phenomenon activated by resonant gaseous column, Zhimin Hu, Zhaoyuan Han, and F. M. White
Influence on fiber inclination and interfacial conditions on fracture in composite materials, S. K. Khanna and A. Shukla
Effects of aging on the tensile and fatigue behavior of the near-α Ti-1100 at room temperature and 593 °C, A. Madsen and H. Ghonem
Correlation of heat transfer and wake effect in the entrance region of an inline array of rectangular modules, Majid Molki, Mohammad Faghri, and Oktay Ozbay
Conjugate natural convection heat transfer in a vertical annulus with internal circumferential fins, M. Molki and M. Faghri
Interaction between a buoyancy-driven flow and an array of annular cavities, M. Molki and M. Faghri
A new correlation for pressure drop in arrays of rectangular blocks in air-cooled electronic units, M. Molki, M. Faghri, and O. Ozbay
HIGH TEMPERATURE ELASTIC‐PLASTIC SMALL CRACK GROWTH BEHAVIOR IN A NICKEL‐BASE SUPERALLOY, A. H. Rosenberger and H. Ghonem
INFLUENCE OF CREEP‐FATIGUE INTERACTION ON HIGH TEMPERATURE FATIGUE CRACK GROWTH BEHAVIOR of Ti‐1100, A. H. Rosenberger and H. Ghonem
On the role of pore fluid and interparticle cementation on wave propagation in granular materials, Martin H. Sadd, Arun Shukla, Frank Sienkiewicz, and A. Gautam
Screw thread machining of composite materials using abrasive waterjet cutting, Matthew D. Sheridan, David G. Taggart, and Thomas J. Kim
EVALUATION OF A FIBER‐OPTIC SENSOR FOR STRAIN MEASUREMENT AND AN APPLICATION TO CONTACT MECHANICS, F. Sienkiewicz and A. Shukla
Tool addition strategies for flexible manufacturing systems, Manbir S. Sodhi, Alessandro Agnetis, and Ronald G. Askin
A hierarchical model for control of flexible manufacturing systems, Manbir S. Sodhi, Ronald G. Askin, and Suvrajeet Sen
Multiperiod tool and production assignment in flexible manufacturing systems, M. S. Sodhi, R. G. Askin, and S. Sen
Fracture criterion for bridging fibers in titanium metal matrix composites at elevated temperature, M. N. Tamin and H. Ghonem
Time-dependent behavior of continuous-fiber-reinforced metal matrix composites: Modeling and applications, M. N. Tamin, D. Zheng, and H. Ghonem
New low-Reynolds-number k-ε model for turbulent flow over smooth and rough surfaces, Hanzhong Zhang, Mohammad Faghri, and Frank M. White