Submissions from 2005
Integrated design analysis for product simplification, G. Lucchetta, P. F. Bariani, and W. A. Knight
Convergence of a genetic algorithm for estimating cardiac material properties, Arun U. Nair, David G. Taggart, and Frederick J. Vetter
Material parameter optimization for three-dimensional rabbit heart, Arun U. Nair, David G. Taggart, and Frederick J. Vetter
Dynamic failure of weak complex interfaces, Carl Ernst Rousseau and Ares J. Rosakis
Elasticity, Martin H. Sadd
A comparison of micro-mechanical modeling of asphalt materials using finite elements and doublet mechanics, Martin H. Sadd and Qingli Dai
Influence of environment, loading frequency and temperature on fatigue crack growth mechanisms in titanium lamellar microstructures, C. Sarrazin-Baudoux, F. Sansoz, and H. Ghonem
Design of a dimpled femoral head in total hip replacements using elastohydrodynamic lubrication theory, Narendra Sharma and Donna Meyer
Transient effects in elastodynamic fracture of graded materials, A. Shukla and N. Jain
On-road eye movement tracking-glance analysis of dynamic scenes, Manbir S. Sodhi
Blast load effects on damage behavior and failure patterns in composites, Arjun Tekalur and Arun Shukla
Phase Change in a Three-Dimensional Rectangular Cavity Under Electromagnetically Simulated Low Gravity: Top Wall Heating With an Unfixed Material, Douglas L. Veilleux, Eduardo Gonçalves, Mohammad Faghri, Yutaka Asako, and M. Charmchi
Phase change in a three-dimensional rectangular cavity under electromagnetically simulated low-gravity: Side wall heating, Douglas L. Veilleux, Eduardo Gonçalves, Mohammad Faghri, Yutaka Asako, and Majid Charmchi
Assessing message display formats of portable variable message signs, Jyh Hone Wang and Yong Cao
Study of the interface issues between motorists and intelligent highway system through variable message signs, Jyh Hone Wang and Yong Cao
Experimental and numerical investigation of melting in the presence of a magnetic field -simulation of low gravity environment, H. Zhang, H. Sun, M. Charmchi, D. Veilleux, and M. Faghri
MRI guided 3D mesh generation and registration for biological modeling, James Qingyang Zhang, John M. Sullivan, Hamid Ghadyani, and Donna M. Meyer
A new method for vibration modal analysis, Wenliang Zhou and David Chelidze
Submissions from 2004
Light activated position sensing array for persons with disabilities, Frank Breau, Brent Marsden, Jebediah McCluskey, R. John Ellwood, Jenna Lewis, Toby Johnson, Ying Sun, Musa Jouaneh, and Robert Comerford
Solidification and melting of gallium in the presence of a magnetic field -Experimental simulation of low gravity environment, M. Charmchi, H. Zhang, W. Li, and M. Faghri
Identifying multidimensional damage in a hierarchical dynamical system, David Chelidze
A dynamical systems approach to failure prognosis, David Chelidze and Joseph P. Cusumano
Parametric model study of microstructure effects on damage behavior of asphalt samples, Qingli Dai and Martin H. Sadd
Performance improvement of 3-D inspection process, Deepak Giri and Musa Jouaneh
Error sources in a 3-D reverse engineering process, Deepak Giri, Musa Jouaneh, and Brent Stucker
Numerical solution of melting processes for unfixed phase-change material in the presence of electromagnetically simulated low gravity, Eduardo Gonçalves, M. Faghri, Y. Asako, and M. Charmchi
Crack-tip stress fields in functionally graded materials with linearly varying properties, N. Jain, C. E. Rousseau, and A. Shukla
Displacements, strains and stresses associated with propagating cracks in materials with continuously varying properties, N. Jain and A. Shukla
Assistive technology devices: A multidisciplinary course, Musa Jouaneh, Ying Sun, and Robert Comerford
Fluid mechanics: Fluid statics, Frank Kreith, Stanely A. Berger, Stuart W. Churchill, J. Paul Tullis, Blake P. Tullis, Frank M. White, Ajay Kumar, Jessica Todd, John C. Chen, Thomas F. Irvine, Massimo Capobianchi, Francis E. Kennedy, E. Richard Booser, Donald F. Wilcock, Robert F. Boehm, Rolf D. Reitz, Jungho Kim, Alan T. McDonald, Sherif A. Sherif, and Bharat Bhushan
Light-guided environmental control device, Brent David Marsden, Frank Breau, R. John Ellwood, Toby Johnson, Jenna Lewis, Jebediah McCluskey, Ying Sun, Musa Jouaneh, and Robert Comerford
Polyethylene wear debris from hip simulator fluid captured and separated using bio-ferrography, Donna M. Meyer, Nevan C. Hanumara, Adam Tillinghast, and Ana Franco
Community based recycling and collection models, Natalie Mohanty and Manbir Sodhi
Use of a genetic algorithm for determining material parameters in ventricular myocardium, Arun U. Nair, David G. Taggart, and Frederick J. Vetter
Design and characterization of a precision fluid dispensing valve, B. Nguon and M. Jouaneh
Model-based selective micro melting for surface roughness improvement, X. Qu, M. Sodhi, and V. Maier-Speredelozzi
Microstructural simulation of asphalt materials: Modeling and experimental studies, Martin H. Sadd, Qingli Dai, Venkitanarayanan Parameswaran, and Arun Shukla
Ductility exhaustion mechanisms in thermally exposed thin sheets of a near-β titanium alloy, F. Sansoz, M. Almesallmy, and H. Ghonem
Practical fracture mechanics in design: Second edition, revised and expanded, Arun Shukla
Dynamic damage growth in particle reinforced graded materials, Arun Shukla and Nitesh Jain
Pullout behavior of polypropylene fibers from cementitious matrix, Sehaj Singh, Arun Shukla, and Richard Brown
Acoustic properties of cenosphere reinforced cement and asphalt concrete, Vikrant Tiwari, Arun Shukla, and Arijit Bose
Effect of compressibility on heat transfer in microchannels, Stephen E. Turner, Yutaka Asako, and Mohammad Faghri
Phase change in a three-dimensional rectangular cavity under electromagnetically simulated low gravity: Side wall heating, Douglas L. Veilleux, Eduardo Gonçalves, Mohammad Faghri, Yutaka Asako, and M. Charmchi
Submissions from 2003
Effect of compressibility on gaseous flows in micro-channels, Yutaka Asako, Tianqi Pi, Stephen E. Turner, and Mohammad Faghri
Uptake and loss of water in a cenosphere-concrete composite material, Nikhil Barbare, Arun Shukla, and Arijit Bose
Processing and mechanical characterization of lightweight polyurethane composites, V. B. Chalivendra, A. Shukla, A. Bose, and V. Parameswaran
Quasi-static stress fields for a crack inclined to the property gradation in functionally graded materials, V. B. Chalivendra, A. Shukla, and V. Parameswaran
Dynamical systems approach to material damage diagnosis, David Chelidze
Multidimensional hidden slow variable tracking in a hierarchical dynamical system, David Chelidze
Finite Element Techniques for Modeling Sandwich Composites Subjected to a Transverse Distributed Load per ASTM-D6416, Robert F. Doleski, Stephen J. Plunkett, Robert W. Klein, and David Taggart
Fabrication, characterization, and dynamic behavior of polyester/TiO2 nanocomposites, Victor M.F. Evora and Arun Shukla
Numerical solution of melting in side-heated rectangular enclosure under electromagnetically simulated low gravity, Eduardo Gonçalves, M. Faghri, Y. Asako, and M. Charmchi
A new approach to teaching a mechanical systems design course, Musa Jouaneh
Watch out, tiger woods!, Musa Jouaneh and Paul Carnevale
Modeling of flexure-hinge type lever mechanisms, Musa Jouaneh and Renyi Yang
Development of a course on product design for environment, Winston A. Knight
Reynolds equation for spherical bearings, Donna Meyer
3-D Model of a Total Hip Replacement In Vivo Providing Hydrodynamic Pressure and Film Thickness for Walking and Bicycling, Donna M. Meyer and John A. Tichy
Using strain gages to investigate subsonic dynamic interfacial fracture in an isotropic-isotropic bimaterial, Vittorio Ricci, Arun Shukla, and Mahesh Kavaturu
Subsonic interfacial fracture using strain gages in isotropic-orthotropic bimaterial, V. Ricci, A. Shukla, V. B. Chalivendra, and K. H. Lee
On the influence of fault bends on the growth of sub‐Rayleigh and intersonic dynamic shear ruptures, Carl-Ernst Rousseau and Ares J. Rosakis
Simulation of Asphalt Materials Using Finite Element Micromechanical Model with Damage Mechanics, Martin H. Sadd, Qingli Dai, Venkit Parameswaran, and Arun Shukla
Effects of loading frequency on fatigue crack growth mechanisms in α/β Ti microstructure with large colony size, F. Sansoz and H. Ghonem
Fatigue crack growth mechanisms in Ti6242 lamellar microstructures: Influence of loading frequency and temperature, F. Sansoz and H. Ghonem
Photoelastic investigation of interfacial fracture between orthotropic and isotropic materials, Arun Shukla, Vijaya B. Chalivendra, Venkitanarayanan Parameswaran, and Kwang H. Lee
Configuring flexible flowlines, Manbir S. Sodhi and Bhaba R. Sarker
A theoretical and experimental investigation of a family of minimum-weight simply-supported beams, Sriruk Srithongchai, Murat Demircubuk, and Peter Dewhurst
Comparisons of optimality criteria for minimum-weight dual material structures, Sriruk Srithongchai and Peter Dewhurst
Effect of surface roughness on nitrogen flow in a microchannel using the direct simulation Monte Carlo method, Hongwei Sun and Mohammad Faghri
A human factors study on message design of variable message sign, Jyh Hone Wang and Yong Cao
Backlash compensation in gear trains by means of open-loop modification of the input trajectory, Martin Warnecke and Musa Jouaneh
Some observations on undergraduate fluids engineering education, Frank M. White
Submissions from 2002
Numerical solution of melting processes for fixed and unfixed phase change material in the presence of magnetic field-simulation of low-gravity environment, Y. Asako, E. Gonçalves, M. Faghri, and M. Charmchi
Effect of compressibility on gaseous flows in micro-channels, Yutaka Asako, Tianqi Pi, and Mohammad Faghri
Effect of particle size and surface treatment on constitutive properties of polyester-cenosphere composites, R. J. Cardoso, A. Shukla, and A. Bose
Dynamic out of Plane Displacement Fields for an Inclined Crack in Graded Materials, V. B. Chalivendra, A. Shukla, and V. Parameswaran
Some issues in the application of cohesive zone models for metal-ceramic interfaces, N. Chandra, H. Li, C. Shet, and H. Ghonem
Optimal tracking of parameter drift in a chaotic system: Experiment and theory, A. Chatterjee, J. P. Cusumano, and D. Chelidze
Multimode damage tracking and failure prognosis in electromechanical system, David Chelidze
A dynamical systems approach to damage evolution tracking, part 1: Description and experimental application, David Chelidze, Joseph P. Cusumano, and Anindya Chatterjee
A dynamical systems approach to damage evolution tracking, part 2: Model-based validation and physical interpretation, Joseph P. Cusumano, David Chelidze, and Anindya Chatterjee
Photoelastic evaluation of stress fields and fracture during dynamic splitting experiments, Jason T. Gomez, Arun Shukla, and Atul Sharma
Numerical solution of melting processes for unfixed phase change material in the presence of electromagnetic field - Simulation of low gravity environment, Eduardo Gonçalves, Mohammad Faghri, Yutaka Asako, and Majid Charmchi
Numerical solution of melting processes for unfixed phase change material in the presence of electromagnetic field - Simulation of low gravity environment, Eduardo Gonçalves, Mohammad Faghri, Yutaka Asako, and Majid Charmchi
Measuring your ecodesign, Winston Knight and Mark Curtis
Static and dynamic fracture analysis for the interface crack of isotropic-orthotropic bimaterial, Kwang Ho Lee, Arun Shukla, Venkitanarayanan Parameswaran, Vijaya Chalivendra, and Jae Sug Hawong
Processing and characterization of a lightweight concrete using cenospheres, S. P. McBride, A. Shukla, and A. Bose
The effects of system and geometric parameters on abrasive water jet nozzle wear, Madhusarathi Nanduri, David G. Taggart, and Thomas J. Kim
Near-tip out of plane displacement fields for dynamic crack propagation in functionally graded materials, Venkitanarayanan Parameswaran and Arun Shukla
Asymptotic stress fields for stationary cracks along the gradient in functionally graded materials, V. Parameswaran and A. Shukla
Mechanical characterization of soft materials using high speed photography and split hopkinson pressure bar technique, A. Sharma, A. Shukla, and R. A. Prosser
Glance analysis of driver eye movements to evaluate distraction, Manbir Sodhi, Bryan Reimer, and Ignacio Llamazares
On-road driver eye movement tracking using head-mounted devices, M. Sodhi, B. Reimer, J. L. Cohen, E. Vastenburg, R. Kaars, and S. Kirschenbaum
Application of jetting technology to pavement deicing, David G. Taggart, Osama Ibrahim, and Milton Huston
Integration of mechanical design and prototyping activities, David G. Taggart, Brent E. Stucker, Thomas Kegler, David Chelidze, and William J. Palm
Economic evaluation of design-for-test alternatives for microelectronics products, Z. Wang and W. A. Knight
Submissions from 2001
Numerical solution of melting processes for fixed and unfixed phase change material in the presence of magnetic field - Simulation of low gravity environment, Y. Asako, E. Gonçalves, M. Faghri, and M. Charmchi
Failure prognosis using nonlinear short-time prediction and multi-time scale recursive estimation, David Chelidze, Joseph P. Cusumano, and Anindya Chatterjee
Procedure for tracking damage evolution and predicting remaining useful life with application to an electromechanical experimental system, David Chelidze, Joseph P. Cusumano, and Anindya Chatterjee