Submissions from 2003
Piezoresistive properties of ceramic strain sensors with controlled nanoporosity, Otto J. Gregory and Tao You
Piezoresistive Properties of ITO Strain Sensors Prepared with Controlled Nanoporosity, Otto J. Gregory and Tao You
Stability and Piezoresistive Properties of Indium-Tin-Oxide Ceramic Strain Gages, Otto J. Gregory and Tao You
Stabilization of indium tin oxide films to very high temperatures, Otto J. Gregory, Tao You, Michael Platek, and Everett Crisman
Self-assembly of surfactants to organogels, Vijay T. John, Gary McPherson, and Arijit Bose
A predictive model for the allowable operating liquid velocities and the biomass concentration in a three phase fluidized-bed biofilm reactor, Hagyoung Lee and Stanley M. Barnett
Pollution prevention guideline for academic laboratories, Edwin Li, Stanley M. Barnett, and Barbara Ray
Multivariable terrain methods, Angelo Lucia and Yang Feng
Phase transition dynamics and microstructure evolution in a crystalline surfactant mesophase using time-dependent small-angle neutron scattering, Blake Simmons, Vivek Agarwal, Mohit Singh, Gary McPherson, Vijay John, and Arijit Bose
The kinetics and mechanism of vesicle self-assembly in aqueous SDS/DTAB mixtures, Millie Wan, Andrea O'Connor, Arijit Bose, and Franz Grieser
Modeling the performance of an aluminum-air cell, Shao Hua Yang and Harold Knickle
Modification of boundary lubrication by oil-soluble friction modifier additives, Yingxi Zhu, Hiroko Ohtani, Michael L. Greenfield, Marina Ruths, and Steve Granick
Submissions from 2002
The role of solution phase water on the deposition of thin films of poly(vinylidene fluoride), Marcel Benz, William B. Euler, and Otto J. Gregory
Magnetic colloid mediated recovery of cadmium ions from an aqueous solution using a flow-through hybrid field-gradient device, Alazar N. Ghebremeskel and Arijit Bose
An apparent n to p transition in reactively sputtered indium-tin-oxide high temperature strain gages, Otto J. Gregory, Qing Luo, Joseph M. Bienkiewicz, Brian M. Erwin, and Everett E. Crisman
Recent developments in materials synthesis in surfactant systems, Vijay T. John, Blake Simmons, Gary L. McPherson, and Arijit Bose
Nanostructured materials synthesis in a mixed surfactant mesophase, Limin Liu, Sichu Li, Blake Simmons, Mohit Singh, Vijay T. John, Gary L. McPherson, Vivek Agarwal, Paul Johnson, Arijit Bose, and Nitash Balsara
Investigation of the thermochromic properties of polythiophenes dispersed in host polymers, Brett L. Lucht, William B. Euler, and Otto J. Gregory
Global terrain methods, A. Lucia and Y. Feng
Binary refrigerant-oil phase equilibrium using the simplified SAFT equation, Angelo Lucia and Qing Luo
Pollution prevention in a zinc die casting company: A 10-year case study, E. Park, R. Enander, and Stanley M. Barnett
Small angle neutron scattering study of mixed AOT + lecithin reverse micelles, Blake Simmons, Vivek Agarwal, Gary McPherson, Vijay John, and Arijit Bose
Small angle neutron scattering study of microstructural transitions in a surfactant-based gel mesophase, Blake A. Simmons, Glen C. Irvin, Vivek Agarwal, Arijit Bose, Vijay T. John, Gary L. McPherson, and Nitash P. Balsara
Morphology of CdS Nanocrystals Synthesized in a Mixed Surfactant System, Blake A. Simmons, Sichu Li, Vijay T. John, Gary L. McPherson, Arijit Bose, Weilie Zhou, and Jibao He
Temporal evolution of microstructures in aqueous CTAB/SOS and CTAB/HDBS solutions, Yashen Xia, Isabella Goldmints, Paul W. Johnson, T. Alan Hatton, and Arijit Bose
Design and analysis of aluminum/air battery system for electric vehicles, Shaohua Yang and Harold Knickle
Submissions from 2001
Influence of preparation conditions on the surface morphology of poly(vinylidene fluoride) films, Marcel Benz, William B. Euler, and Otto J. Gregory
Self-compensated ceramic strain gage for use at elevated temperatures, Otto J. Gregory and Qing Luo
Global Terrain methods for chemical process simulation, A. Lucia and F. Yang
Oil/water separation using nanofiltration membrane technology, Eugene Park and Stanley M. Barnett
Pollution prevention and biochemical oxygen demand reduction in a squid processing facility, Eugene Park, Richard Enander, Stanley M. Barnett, and Chong Lee
Compressible gas flow through smooth and rough microchannels, Stephen E. Turner, Hongwei Sun, Mohammad Faghri, and Otto J. Gregory
Submissions from 2000
Simulation of ternary ammonia-water-salt absorption refrigeration cycles, Vinay G. Balamuru, Osama M. Ibrahim, and Stanley M. Barnett
A flow-through, hybrid magnetic-field-gradient, rotating wall device for magnetic colloidal separations, Alazar N. Ghebremeskel and Arijit Bose
Ceramic strain gages for propulsion health monitoring, Otto J. Gregory and Qing Luo
A polyaniline coating material for inhibiting corrosion in marine environment, Yuan Lin, Sze C. Yang, Robert Clark, and Richard Brown
Structured materials syntheses in a self-assembled surfactant mesophase, Sichu Li, Glen C. Irvin, Blake Simmons, Suguna Rachakonda, Premachandran Ramannair, Sukanta Banerjee, Vijay T. John, Gary L. McPherson, Weilie Zhou, and Arijit Bose
Complex domain chemical process simulation in theory and in practice, Angelo Lucia
Multiphase equilibrium flash calculations, Angelo Lucia, Laxminarasimhan Padmanabhan, and S. Venkataraman
Chemical vapor deposition of alpha aluminum oxide for high-temperature aerospace sensors, Raymond H. Niska, Alan P. Constant, Tony Witt, and Otto J. Gregory
Numerical Investigation of Boundary Conditions for Moving Contact Line Problems, Sandesh Somalinga and Arijit Bose
Temperature insensitive smart optical strain sensor, Kimberly A. Thomas, William B. Euler, Everett E. Crisman, and Otto J. Gregory
Effect of surface roughness on gaseous flow through microchannels, Stephen E. Turner, Mohammad Faghri, Hongwei Sun, and Otto J. Gregory
Electroactive polymer for corrosion inhibition of aluminum alloys, S. C. Yang, R. Brown, R. Racicot, Y. Lin, and F. McClamon
Submissions from 1999
Two-Element Dielectric Antenna Serially Excited by Optical Wavelength Multiplexing, Everett E. Crisman, John S. Derov, P. H. Carr, S. D. Mittleman, and D. D. W. Liu
Smart optical waveguide sensors for cumulative damage assessment, Otto J. Gregory, William B. Euler, Everett E. Crisman, Hanan Mogawer, and Kimberly A. Thomas
More process simulation in singular regions, Angelo Lucia and Delong Liu
Local pressure measurement of gaseous flow through microchannels, Stephen E. Turner, Hongwei Sun, Mohammad Faghri, and Otto J. Gregory
Submissions from 1998
Immunoassays Based on Surface-Enhanced Infrared Absorption Spectroscopy, Chris W. Brown, Yue Li, John A. Seelenbinder, Phillip Pivarnik, Arthur G. Rand, S. V. Letcher, Otto J. Gregory, and Michael J. Platek
Novel sampling device for obtaining process near-infrared spectra of high-pressure gases, C. W. Brown, Amit Mangal, and Stanley M. Barnett
Improved passivating Cr2O3 scales for thin film high temperature PdCr strain gages, S. E. Dyer, O. J. Gregory, and J. D. Cooke
An Acceleration Method for Dogleg Methods in Simple Singular Regions, Angelo Lucia and Delong Liu
Reverse iteration in chemical process simulation, Angelo Lucia and Delong Liu
Enthalpy measurements in aqueous SDS/DTAB solutions using isothermal titration microcalorimetry, Robert J. Meagher, T. Alan Hatton, and Arijit Bose
Complex domain distillation calculations, R. Taylor, K. Achuthan, and A. Lucia
Submissions from 1997
Metallic nitrides for corrosion protection in marine environments; theory compared to experimental results, A. Giaimo, M. N. Alias, and R. Brown
Simulation of Refrigerant Phase Equilibria, Arthur S. Gow, Xinzhou Guo, Delong Liu, and Angelo Lucia
High temperature strain gages based on reactively sputtered AlNx thin films, Otto J. Gregory, Arnout Bruins Slot, Paul S. Amons, and Everett E. Crisman
Improving the performance of ammonia-water absorption cycles using salt additives and membranes, Osama M. Ibrahim, Stanley M. Barnett, and Vinnay G. Balamuru
Dynamics of micelle-vesicle transitions in aqueous anionic/cationic surfactant mixtures, Andrea J. O'Connor, T. Alan Hatton, and Arijit Bose
Corrosion protection comparison of a chromate conversion coating to a novel conductive polymer coating on aluminum alloys, R. J. Racicot, S. C. Yang, and R. Brown
Evidence of a passive layer formation from a conductive polymer coating on aluminum alloys, R. J. Racicot, S. C. Yang, and R. Brown
Polymeric complexes of polyaniline as anticorrosion coatings, R. J. Racicot, S. C. Yang, and R. Brown
Corrosion protection of aluminum alloys by double-strand polyaniline, Robert Racioot, Richard Brown, and Sze C. Yang
DNA isolation using avidin-coated magnetic nanoclusters, Srinivas V. Sonti and Arijit Böse
Submissions from 1996
Preparation and piezoresistive properties of reactively sputtered indium tin oxide thin films, S. E. Dyer, O. J. Gregory, P. S. Amons, and A. Bruins Slot
Investigation of Wetting Hydrodynamics Using Numerical Simulations, David E. Finlow, Prakash R. Kota, and Arijit Bose
Characteristics of a reactively sputtered indium tin oxide thin film strain gage for use at elevated temperatures, Otto J. Gregory, Stephen E. Dyer, Paul S. Amons, and Amout Bruins Slot
Foundations of engineering-a first year course, Harry Knickle
Anti-corrosion studies of novel conductive polymer coatings on aluminum alloys, R. J. Racicot, R. L. Clark, H. B. Liu, S. C. Yang, M. N. Alias, and R. Brown
An investigation of microstructures in cationic/anionic surfactant suspensions by cryogenic transmission electron microscopy, Iskandar I. Yaacob and Arijit Bose
Submissions from 1995
Synthesis of acid protease from Mucor miehei: integration of production and recovery, Jose Escobar and Stanley M. Barnett
Hands-on approach to foundations of engineering, Harold N. Knickle
Thin film conductive polymers on aluminum surfaces: interfacial charge-transfer and anticorrosion aspects, Robert Racicot, R. L. Clark, H. B. Liu, Sze C. Yang, M. N. Alias, and R. Brown
Cell separation using protein-a-coated magnetic nanoclusters, Srinivas V. Sonti and Arijit Bose
Large Scale Isolation of Expression Vector Cassette by Magnetic Triple Helix Affinity Capture, Srinivas V. Sonti, Matthew C. Griffor, T. Sano, S. Narayanswami, Arijit Bose, C. R. Cantor, and Albert P. Kausch
Magnetic nanoparticles produced in spontaneous cationic-anionic vesicles: Room temperature synthesis and characterization, Iskandar I. Yaacob, Anthony C. Nunes, and Arijit Bose
Submissions from 1994
Thin film thermocouples for advanced ceramic gas turbine engines, Gregg E. Aniolek and Otto J. Gregory
Synthesis and characterization of magnetic nanoparticles in spontaneously generated vesicles, Iskandar I. Yaacob, Anthony C. Nunes, Arijit Bose, and Dinesh O. Shah
Submissions from 1993
Corrosion behavior of carbon fiber composites in the marine environment, M. N. Alias and R. Brown
Performance of a dielectric-coated monolithic hollow metallic waveguide, P. Bhardwaj, O. J. Gregory, C. Morrow, G. Gu, and Ken Burbank
Effect of composition and thickness on corrosion behavior of TiN and ZrN thin films, R. Brown, M. N. Alias, and R. Fontana
Effect of agitation speed on the synthesis of Mucor miehei acid protease, Jose Escobar and Stanley M. Barnett
A report on the research performed under the Rosensweig grant, Dana T. Grow, Srinivas V. Sonti, Arijit Bose, and K. Raj
Electric field induced variations in the wettability of stainless steel by ionic surfactant and electrolyte solutions, Sanjay Wahal, Clarice Owiti, and Arijit Bose
Synthesis of Aluminum Hydroxide Nanoparticles in Spontaneously Generated Vesicles, Iskandar I. Yaacob, Suhas Bhandarkar, and Arijit Bose
Submissions from 1992
Damage to composites from electrochemical processes, M. N. Alias and R. Brown
Cyclic oxidation of Haynes 230 alloy, Fen Ren Chien and R. Brown
Cyclic hot corrosion of Haynes 230 alloy, Fen Ren Chien and Richard Brown
Surfactant solution cleaning of sintered powdered metals, Kaushik Doshi, D. J. Gray, and M. Ballou
The influence of viscoelasticity on the existence of steady solutions in two-dimensional rimming flow, Dtltp Raiafiopatan, Ronald J. Phillips, R. Robert, C. Armstrong, Robert A. Brown, and Arijit Bose
Swelling behavior of hyaluronic acid gels, Chirag B. Shah and Stanley M. Barnett
Dielectric stability of oxides formed on NiCrAlY-coated substrates, C. Michael Trottier, Otto J. Gregory, and Kenneth A. Burbank
Corrosion behavior of ion plated and implated films, L. van Leaven, M. N. Alias, and R. Brown
Submissions from 1991
Pollution prevention program at the university of Rhode Island, Stanley M. Barnett
Sputtered TiN thin films for improved corrosion resistance, P. Bhardwaj, O. J. Gregory, K. Bragga, and M. H. Richman
Noble metal implantation to reduce hydrogen embrittlement in steels, P. Buckley, B. Placzankis, L. Lowder, I. G. Brown, and R. Brown
Reduced hydrogen embrittlement susceptibility in platinum implanted high strength steel, J. G. Cowie, L. J. Lowder, R. J. Culbertson, W. E. Kosik, and R. Brown
Fabrication of High-Conductivity, Transparent Electrodes with Trenched Metal Bus Lines, Otto J. Gregory, R. J. Zeto, E. Hryckowian, and K. A. Burbank
Electrokinetic measurements of particles in lubricating oils: Implications for filtrations, Tushar K. Misra and Stanley M. Barnett