Document Type
Article
Date of Original Version
2018
Department
Civil and Environmental Engineering
Abstract
The fracture response of cementitious composites containing compliant microencapsulated inclusions and its influence on the fracture process zone (FPZ) are reported. The incorporation of small amounts of phase change material (PCM) microcapsules (replacing up to 10% by volume of sand) is found to slightly improve the strength, fracture toughness, critical crack tip opening displacement (CTODc), and the strain energy release rates. Digital image correlation is used to examine the FPZ at the tip of the advancing crack, to better explain the influences of compliant microscale inclusions on energy dissipation. The FPZ widths are found to slightly increase with PCM dosage but its lengths remain unchanged. The increase in FPZ width is linearly related to the CTODc, showing that inelastic deformations of the crack-tip in the direction of crack opening are indeed influenced by microscale inclusions. It is shown that cementitious systems containing microencapsulated PCMs can be designed to demonstrate mechanical performance (including fracture) equivalent to or even better than their PCM-free counterparts, in addition to the well-described thermal performance.
Citation/Publisher Attribution
Das, S., Aguayo, M., Kabay, N., Mobasher, B., Sant, G., & Neithalath, N. (2018). Elucidating the influences of compliant microscale inclusions on the fracture behavior of cementitious composites. Cement and Concrete Composites, 94, 13-23. https://doi.org/10.1016/j.cemconcomp.2018.08.009 Available at: https://doi.org/10.1016/j.cemconcomp.2018.08.009
Author Manuscript
This is a pre-publication author manuscript of the final, published article.
Terms of Use
This article is made available under the terms and conditions applicable
towards Open Access Policy Articles, as set forth in our Terms of Use.